Creality K2 Plus 3D Printer
Rs. 141,998
- Intelligent CFS: CFSx4 delivering up to 16 colors
- 350x350x350mm: More space for creativity
- Step-servo Motor System: 30000mm/s² acceleration and quiet
- Actively Heated Chamber: Supporting engineering filaments
- Dual AI Cameras: Smart to adjust flow rate and alert failures
- Sturdy
Detail
| Printing Speed : | <600mm/s |
| Acceleration : | 30000mm/s² |
| Printing Accuracy : | 100mm±0.1mm |
| Layer Height : | 0.05-0.3mm |
| Extruder : | Dual-gear direct drive extruder |
| Filament Diameter : | 1.75mm |
| Nozzle Diameter : | 4mm |
| Nozzle Temperature : | ≤350°C |
| Heatbed Temperature : | ≤120°C |
| Chamber Temperature : | ≤60°C |
| Build Plate : | Flexible build plate |
| Leveling Mode : | Full-auto Leveling |
| XYZE Motor : | Servo-step motor |
| File Transfer : | USB Drive/Ethernet/WiFi |
| File Storage : | 32GB EMMC |
| Wifi : | 2.4GHz/5GHz |
| Printer Gross Weight : | 46 kg |
| Printer Diamension : | 62x59x71 cm |
- Dual Z-axis Assisted by 4 Linear Rods: Extremely steady while carrying the print bed up and down. Virtually no layer shift.
- 5mm Thick Aluminum Alloy Heatbed: Holding exceptionally well against deformation and vibration.
- Incredibly Quiet While Printing Hard: The working noise of K2 Plus is only 45dB, which is credited to the virtue of step-servo motors, dynamically balanced fans, and a snug enclosure It is no louder than someone typing on a laptop PC, truly a creative machine you can work next to.
- Automated Run-out & Sensor Filament Cutter: The steel-bladed cutter features a magnetic retraction mechanism for precise filament positioning and minimal waste, with an indicator to replace the filament when only one inch remains.