Creality Space Pi Filament Dryer Plus
Rs. 9,799
- Creality Space Pi Filament Dryer Plus box contains 2 rolls of 1 kg filaments. And its equipped with 4 filaments PTFE pipe holes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time. Keep your filaments dry and always ready to use with our Filament Dryer. It has one-key pre-configured temperature and drying time settings for different filament types. Support up to 12 types of filaments, including common and high-performance composite like PLA-CF,PA-CF, ASA. This reduces setup complexity and enhances your user experience.
Detail
| Product name : | Creality Space Pi Filament Dryer Plus |
| Model : | DB-04 |
| Package size : | 343x226x300mm |
| Net weight : | 1900g |
| Product color : | Space grey |
| Input voltage : | US 110V 50/60Hz GB/UK/EUR 220V 50/60Hz |
| Rated power : | 160 W |
| Temperature control range : | 45°C-70°C |
| Heating duration : | 0-48h |
| Filament diameter : | 1.75mm/2.85mm |
- Dual Spool Filament Dryer Box: Each Creality Space PI Plus is equipped with 4 filament holes and PTFE pipes, which can dry 2 rolls of 1KG filament at the same time, meeting the needs of users to dry a vide range of filaments and 2 3D printers at the same time, saving space and making the work area tidier.
- New PTC Fast Heater, 360° Hot Air Circulation: Different from the general PI heaters on the market, our unique PTC heater can heat up faster and are more energy-efficient. The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
- One Key Set for Each Type of Filaments: Space Pi Plus has one-key temperature settings for 12 different type of 3D Printing filaments, including PLA, TPU, ABS, ASA, PETG, PC, PA, PET, PLA-CF, PETG-CF, PA-CF. We have set the corresponding drying temperature for each type of filaments in advance. You do not need to check or adjust it yourself. The drying box will start working appropriately immediately.
- 4inch Touch Screen for Easy Operation: The Creality Space Pi Plus Filament Dryer Box comes with a 4inch touch screen which can clearly and brightly display temperature and time, making it simple for you to track drying conditions. With the touch screen, you can easily adjust the temperaturefrom 45℃ to 70℃, and set the drying time from 0 to 48 hours, make sure the filament is completely dry to print the results better.
- Parameter Power-off Memory: No need to readjust parameters every time you start up. After a power outage, the filament dryer can remember your previous filament and temperature settings, allowing for quick start drying.