Creality Filament System-CFS
Rs. 28,499
- Up to 16 Colors for 3D Printing
- Cleaner Support Removal
- Auto Filament Identification & Mapping
- Auto Filament Switch & Relay
- Auto Run-out/Tangle Detection
- Moisture-proof Filament Storage
Detail
| Filament Slots : | 4 |
| Rated Power : | 20W |
| Rated Voltage : | DC 24V |
| CFS Connections : | ≤4 |
| Status Indicators : | 4 ( each slot having one) |
| Multicolor 3D Printing : | Yes |
| Auto Filament Relay : | Yes |
| RFID-tag Reader : | Yes |
| Filament Run-out Detection : | Yes |
| Filament Buffer : | Yes |
| Anti-moisture Storage : | Yes with desiccants |
| Compatible Filaments : | |
| Gross Weight : | 5.8 kg |
| Dimension : | 43.8x36.5x33 cm |
- 【Creality CFS Filament System for K2 Plus】Ready for Multicolor Magic! Enabling multicolor 3D printing with intelligent filament management, the system offers a smooth and efficient way to bring your colorful creations to life.
- 【Intelligent CFS: CFSx4 delivering up to 16 colors】Creality CFS comes with a connection hub on the back. By hooking up as many as four CFS units together, you are able to print in the splendor of 16 colors.
- 【Snap-away Support Enabled】CFS auto filament system is able to deliver model supports in a different material that can be easily snapped away or even water-soluble. The resulting 3D model will not show any support marks
- 【Auto Filament ldentification, Switch & Relay】Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printer For regular filaments, you can also edit the info manually. CFS can switch filaments fluently and precisely for a multicolortask. It can also relay a running-out spool with a similar one installedd. Minimal interruption and waste. *Not compatible with flexible TPU, damp BVOH/PVA, or warped cardboard filament spools
- 【Auto Filament Mapping, Run-out/Tangle Detection】Sensors are used to watch over each spool of filament. When a filament runs out or gets tangled, it will pause and notify you immediately. Upon loading an RFID-tagged filament, CFS will read its type, color, etc., and sync them to your 3D printeer For regular filaments, you can also edit the info manually.
- 【Moisture-proof Filament Storage, Temperature & Humidity Display】You can read the current temperature and humidity clearly. If the humidity level goes excessively high, it will give you a timely alert.The airtight design of CFS can keep the filament from absorbing moisture from the air. Aided by desiccants, the filament will stay dry from the beginning to the end.
- 【Cardboard Spool Compatibility】No more filament jumping out of the slot during printing. Perfectly adapted to Creality Hyper Series cardboard spools.