Refurbished Creality PLA 3D Printing Filament Red ,1.75mm,Net Weight-1kg
Rs. 1,159
- This filament has good color consistence and have a specified shelf life of up to 6 months after opening and 1 year if unopened.
- Comes in vacuum sealed packaging with desiccant. CR PLA is also cold resistant while standard PLA is not.
Detail
| Material : | CR-PLA |
| Dimension : | 25.5CM*12CM*23CM |
| Density : | 1.25±0.05g/gm³ |
| Melt flow rate : | 5-7g/min(190 degrees 2.16kg) |
| Water absorption : | 0.5% |
| Tensile Strength : | ≥60MPa |
| Flexural modulus : | ≥60MPa |
| Elongation at break : | ≥3.0% |
| Diameter : | 1.75mm |
| Bubble : | 100% no bubbles |
| Coil Diameter : | 200mm |
| Coil Height : | 66mm |
| Coil Inner Diameter : | 56mm |
| Temperature : | PLA no heated bed |
- Good Printing Effect
- Dimensional Stability
- Non-toxic
- Wear Resistance, High Impact Strength
- Tough hard
- Eco-Friendly Filament
- Smooth Printing
- Good glossy surface