TronHoo PLA+ White

Brand: Tronhoo
Rs. 1,729
(1 Reviews)
    • TronHoo PLA 3D filament use high purity raw materials that have low shrinkage and good layer bonding features, meeting your demands for different printing projects with higher toughness. It is 100% made of environment-friendly natural materials. It’s biodegradable, non-toxic and environmentally friendly. Completely dried for 24 hours before packaging and vacuum sealed with desiccants, enable much smoother and more stable printing.
This Product is Out Of Stock......

Detail

Diameter : 1.75 ± 0.2mm
Printing temperature : 175-200℃
Heated bed temperature : 50-80℃
Density : 1.25 ± 0.05 g/cm3
Heat deflection temperature : 50-60℃
Melt flow rate : 5-7 g/min (190℃ 2.16kg)
Tensile Strength : ≥ 60 Mpa
Bending strength : ≥ 70 Mpa
Elongation at break : ≥3.0%
N.W. : 1.0 kg
G.W. : 1.3 kg
Length : 330m

  1.  Good toughness
  2.  High strength
  3.  High stiffness
  4.  No block nozzle
  5.  Good stick hot bed
  6.  Wide range temperature
  7.  Low shrinkage
  8.  Thermoforming dimensional stability
  9.  Accurate diameter: 3.0/1.75mm
  10.  Variations ±0.1mm
  11.  Roundness ±0.05mm

5.0

Average Rating

(1 Reviews)
100%Recommended
100%
0%
0%
0%
0%
Login to Review