Magforms Elastic600 Resin Grey-1kg
Rs. 2,499
- The Magforms Elastic600 3D Photopolymer Resin is designed for use with SLA (Stereolithography) and DLP (Digital Light Processing) 3D printers. This resin is known for its flexibility and durability, making it ideal for printing parts that require elasticity and the ability to withstand repeated bending and stretching.
Detail
| Tensile Strength : | 5-6MPa |
| Flexural Strength : | 90-110MPa |
| Elongation at Break : | 45-55% |
| Izod Impact(Notched) : | 140-150J/m |
| Heat Deflection Temperature : | 56°C |
| Hardness(Shore D) : | 30 |
- Flexible and Elastic: Ideal materials to replace silicone, polyurethane and rubber for packing and moulding.
- Good flexibility: The flexibility of Elastic600 is similar to the rubber or TPU. Building parts with low hardness and perfect toughness.
- Resistance to tear: C800 is easy to clean thoroughly with no residual resin after post-curing. So it can fasten the cleaning process of the products. Marvellous tear resistance so that the parts will not break even be squeezed, twisted or bent many times.
- Wide compatibility: This resin is compatible with most 405nm wavelength stereolithography DLP/LCD 3D printers.