₹118749.00

Delta Core Structure: High-speed printing with precise motion control. Large Build Volume: Spacious printing area for larger models. Touchscreen Interface: Easy navigation with a responsive control panel. Auto-Leveling: Ensures accurate bed leveling for optimal prints. All-Metal Frame: Sturdy design for enhanced stability. Fast Print Speed: Capable of high-speed prints without sacrificing quality. Filament Runout Detection: Alerts when filament runs out or breaks.

₹75999.00 ₹98539.00

Realizing Your Idea at up to 1000mm/s Printing Speed Quieter Down to 55dB yet Powerful: the New Cooling System Precise, High-Quality & Clog-Free, Powered by New Algorithms ?260*330 Large Volume for Your Ideas

₹158999.00 ₹212599.00

Epic Speed at 1200mm/s, Double Your Outcome ?320*430mm Volume Unbound Your Creativity Max Hot End Temp. at 350?, Open for High-Performance Materials Quieter down to 55dB yet Powerful: the New Cooling System Enjoy Fine Printing with FLSUN Algorithms 2.0 and AI Inspection

₹1549.00 ₹2039.00

Overview The Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance

₹1499.00 ₹1959.00

The PTFE tube connector is a component used to connect PTFE tubes and is installed above the effector module so that consumables can enter the throat correctly.

₹3869.00 ₹4979.00

The motors are three identical stepper motors installed on the top above the three axes of the printer, used to drive the tool head to move in the XYZ direction. Includes motor , motor cable and synchronized wheel.

₹5329.00 ₹6989.00

An original motherboard for the QQ-S series of printers. You could also use it as the basis for updating an older QQ to 32-bit Includes the original A4988 Stepper Drivers. To run with a smooth print and in silence, consider upgrading to x4 2208 stepper drivers, also in stock.

₹1529.00 ₹1979.00

Original spare part

₹9999.00 ₹13009.00

High-pressure cooling fan Large Diameter Air Duct Independent Large Impeller Design Internal Muffler Design

₹2569.00 ₹3349.00

₹8439.00 ₹10899.00

FLSUN V400 3D Printer Hotend Nozzle Kit with Silicone Sleeve Extruder Parts Print Head Brass Heat Block Throat Copper Plated

₹8559.00 ₹11599.00

₹3809.00 ₹4969.00

₹7439.00 ₹9509.00

₹7389.00 ₹9579.00

V400 nozzle kit

₹4379.00 ₹5799.00

SR Belt 6 pieces

₹819.00 ₹1089.00

FLSUN SR Cooling fan

₹249.00 ₹329.00

FLSUN 0.4mm Nozzle

₹4029.00 ₹5209.00

SR heating rod / temperature sensor / nozzle combination kit

₹6009.00 ₹7699.00

This is a replacement mainboard for FLSUN 3D printers.

₹4209.00 ₹5459.00

Flsun S1 with this sleek tempered glass front door. Designed for perfect fit and visibility, it offers dust protection, a clean look, and easy access with a magnetic closure. A practical and stylish addition to your 3D printing setup.

₹2599.00 ₹3459.00

Enhance your Flsun S1 3D printer with the Filament Glass Door, designed to deliver a seamless blend of function and aesthetics. Built specifically for the Flsun S1, this transparent door provides a clear view of your filament chamber while maintaining a clean and enclosed environment.

₹1349.00 ₹1799.00

The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of the filament and the printing accuracy.

₹3929.00 ₹5029.00

SR Effector For SR Printer

₹3949.00 ₹5099.00

The drying box board is the main board of the drying box and is responsible for implementing functions related to the interior of the drying box

₹2399.00 ₹3229.00

The Flsun Lattice Glass is likely a print surface or build plate designed for 3D printers, specifically for the Flsun Super 3D printer. A glass print surface is commonly used in 3D printing to provide a smooth and level platform for printing objects. It adapt to FLSUN Super Racer models. It has Great flatness, no warping edge also Excellent hardness & durable, widely compatible.

₹3949.00 ₹5349.00

Flsun S1 Effector Adapter Board

₹809.00 ₹1049.00

SR Photoelectric switch for SR Printer Adapt to FLSUN Super Racer models

₹2279.00 ₹3009.00

The drying chamber cable is an 11pin cable used to connect the effector and the motherboard.

₹1349.00 ₹1769.00

The effector fan?2515? is located inside the effector and is used to cool and reduce the temperature of the throat to prevent the consumables from softening or clogging during the melting process of the throat. The fan automatically turns on when heating starts and stops when the temperature drops below 50°C.

₹6649.00 ₹8529.00

The energy storage board provides backup power to cope with power interruptions or instability.

₹1229.00 ₹1599.00

The primary component is the nozzle itself. Nozzles come in various sizes, and the kit may include different nozzle sizes, allowing you to change the diameter of the nozzle for different printing tasks. A specialized wrench or tool for removing and replacing nozzles is often included to make the process easier.

₹3709.00 ₹4739.00

Flsun S1 Extruder motor

₹2509.00 ₹3299.00

The S1 nozzle uses a 0.4mm bimetallic nozzle made of special material. The upper part of the nozzle is made of brass, which has better thermal conductivity, and the lower part is made of hardened steel, which has stronger wear resistance. This special design ensures the extrusion flow rate is high. It also greatly increases its durability.

₹749.00 ₹969.00

FLSUN S1 Limit Switch

₹4869.00 ₹6359.00

Excellent first-layer adhesion Compatibility with various filaments Easy module removal 330*330 mm printing size

₹4469.00 ₹5809.00

The power supply provides power to the various components of the printer, ensuring that they operate properly. It is placed in the lower case of the printer.

₹28999.00 Out Of Stock

Delta Core Structure: High-speed, precise printing with reduced vibrations. Large Build Volume: Spacious printing area for bigger models. Auto-Leveling: Accurate bed leveling for optimal print results. Touchscreen Interface: Easy control with an intuitive display. High-Speed Printing: Capable of faster prints without compromising quality. Stable Frame: Durable and reliable construction for consistent performance.

₹46998.00 Out Of Stock

Fast printing Power loss recovery Auto-leveling Delta Structure, More Stable And Durable Handheld Touch Screen, Easy To Move Dual Gear BMG Extruder Large Print Size Filaments Supported - PLA, ABS, PETG, TPU

₹43191.00 Out Of Stock

• Fast printing • Power loss recovery • Auto-leveling • Delta Structure, More Stable And Durable • Handheld Touch Screen, Easy To Move • Dual Gear BMG Extruder • Large Print Size • Filaments Supported - PLA, ABS, PETG, TPU

₹23369.00 Out Of Stock

Delta Structure: High-speed printing with precise motion control. Large Build Volume: Spacious area for large projects. Auto-Leveling: Ensures accurate bed leveling for better prints. Touchscreen Interface: Easy-to-use control panel. Fast Printing: Capable of high-speed prints without sacrificing quality. Stable Frame: Provides durability and consistent performance.

₹69999.00 Out Of Stock

Up to 400mm/s Printing Speed 300°C Bi-Metal Hotend Dual Gear Direct Drive Extruder Removable PEI Spring Steel Platform ⌀300*410mm Large Printing Area 7" Touch Screen Pad with Klipper Filament Support : PLA/PLA+/ABS/PETG/W000/TPU/PC/NYLON

₹67899.00 Out Of Stock

•3D Printer with enclosure •High-Speed Printing • Support 300? Printing • Large Build Volume • Dual Drive Proximity Extruder • All Metal Structure Use of enclosure: ? Use a wider range of filaments ?Constant temperature for more accuracy with advanced materials ?Quieter printing environment ?Made of blister-processed, high-quality PC.– stunning visually

₹29999.00 Out Of Stock

FLSUN V400 Enclosure, Perfect printing with more filaments Use a wider range of filaments Constant temperature for more accuracy with advanced materials Quieter printing environment Made of blister-processed, high-quality PC.– stunning visually

₹811.00 Out Of Stock

The main purpose of this sensor is to assist in calibrating the print bed by measuring the distance between the nozzle and the bed at various points, ensuring that the nozzle is at the correct height during printing. High leveling modules ensure that the printing head is stable and reliable. This is a brand new and high quality wireless leveling modules.

₹1909.00 Out Of Stock

FLSUN SR Extruder

₹4259.00 Out Of Stock

₹5828.00 Out Of Stock

V400 Belt 6 pieces

₹5113.00 Out Of Stock

FLSUN S1 Camera

₹183.00 Out Of Stock

Heat Rod is a crucial component in 3D printers and other systems that require precise and controlled heating. Heat rod are known for their rapid heating capabilities, allowing the hotend to reach the desired temperature quickly, which is essential for efficient 3D printing.

₹2399.00 Out Of Stock

TMC2209 is upgraded compared with TMC2208,not only can completely replace TMC2208,but also have more features,as more powerful,silent. TMC2209 provides a current dynamic regulation technology that saves up to 75% of electrical energy.

₹3639.00 Out Of Stock

The item comes complete with x2 shroud cooling fans, x1 radiator cooling fan, a complete V6 assemble, including hotend and 0.4mm nozzle. The wiring is complete, it has the PTFE tube fitted and the wiring already supports the Level Switch, and it already has the magnetic plate fitted. Simply screw it on to your unit, add two cooling shrouds and go! No soldering required.

₹1146.00 Out Of Stock

SR Hot bed kit

₹183.00 Out Of Stock

The Filament Sensor is used to detect the filament in the beating state of the 3D printer, pause the detection, and automatically stop the 3D printing when the filament runs out. Optimize the inlet/outlet of the material detection module to reduce the feeding resistance. It is wear-resistant copper sleeves are added to the inlet and discharge port at the same time, which can effectively prolong the service life of the product.

₹2099.00 Out Of Stock

Description: One Power Supply Unit, as fitted to QQ series Q5 and V400 Case Material Aluminium. Input: 115V or 230v (switchable) Output Voltage: 24v adjustable Output Current: 15 amps max Model: P360W24V What you will receive: x1 24v PSU

₹1537.00 Out Of Stock

FLSUN V400 COOLING FAN

₹4669.00 Out Of Stock

The nozzle uses a 0.4mm bimetal nozzle. This special design ensures extrusion flow and greatly increases its durability.

₹1799.00 Out Of Stock

Flsun 3D Printer Accessories SR/Q5/QQS PRO Nozzle Suit Module V6 Heating Blocks

₹14849.00 Out Of Stock

FLSUN V400 Effector3D Printer Accessories The Original Parts 2022 The Latest Product Extruder Head Combination

₹3429.00 Out Of Stock

Hot Bed for QQ-S pro Adapt to FLSUN QQ-S models Great flatness, no warping edge, Excellent hardness & durable, widely compatible