Snapmaker 2.0 Dual Extrusion 3D Printing Module
Rs. 24,999
- The Snapmaker 2.0 Dual Extrusion 3D Printing Module is an accessory for the Snapmaker 2.0 3-in-1 3D printer, which enhances its capabilities by allowing dual-color or multi-material 3D printing. Each extruder is equipped with its own heating element and temperature sensor, enabling independent temperature control for different materials.To prevent overheating and ensure quality prints, each extruder typically comes with its own cooling fan or mechanism.
Detail
| Dimensions (W × D × H) : | 108 mm × 70 mm × 133 mm |
| Package Dimensions (W × D × H) : | 279 mm × 254 mm × 177 mm |
| Frame Material : | Aluminum alloy |
| Weight : | 1.0 kg |
| Package Weight : | 3.2 kg |
| Flow : | 20 mm³/s |
| Nozzle Diameter (Standard) : | 0.4 mm |
| Nozzle Diameter (Optional) : | 0.2 mm, 0.6 mm, 0.8 mm |
| Nozzle Material (Standard) : | Brass |
| Nozzle Material (Optional) : | Hardened steel |
| Max. Nozzle Temperature : | 300°C |
| Max. Recommended Printing Speed : | 100 mm/s |
| Supported Materials : | PLA, ABS, ASA, PETG, TPU (Hardness > 90 Shore A), Breakaway PLA, PVA, HIPS, Nylon, Carbon Fiber Reinforced Nylon, Glass Fiber Reinforced Nylon |
| Input Voltage : | 24V DC |
| Operating Temperature : | 15°C–30°C |
- The unique combination of a stepper motor, planetary gear and dual drive gears on each hotend ensures a smooth extrusion with a flow rate of 20 mm³/s.
- The module enables dual extrusion and working with two different materials at the same time.
- Filament residues on a clogged nozzle are horrific! This problem should be solved with the Dual Extrusion Module since each hotend is equipped with its own special fan.
- The fan ensures that the filament does not melt too early in the heatsink and thus clog the hotend.